TrueRC Canada

SMART CAHRGER 2030 is for Li-Poly , Ni-CD and Ni-MH. Please read this manual carefully and use correct way.

1. Specification & Instructions Chargerable Battery
* Li-Poly battery : 1 ~ 3Cell
* Ni-CD battery : 1 ~ 8Cell
* Ni-MH battery : 1 ~ 8Cell

Charging port Selection
* Li-Poly Battery : 1~2 cell --- Automatic Select
3 cell --- Manual Select
* Ni-CD battery : 1~8 cell --- Automatic Select
* Ni-MH battery : 1~8 cell --- Automatic Select

Working Voltage and Current
* In Put Voltage : 12V (10.5 ~ 15V)
* Out put voltage : 4.2V +- 1%.
* Selectable out put voltage : 3.7V(1Cell), 7.4V(2Cell), 11.1V(3Cell) - (Li-Poly Battery only.)
* Selectable Out Put Current : 110mA,250mA,500mA,750mA,1200mA.

In Put and Out Put Protection
* Reverse Polarity & Short Circuit Protection System.

Trickle charge
* When you have completed charging,then It will be switched "Trickle Mode".
Dimension (mm) * 90mm x 48mm x 11mm

2. LED Display
POWER LED(Left side)
* Green LED On : Power On(12V)
* Reverse Polarity of In Put Voltage : Red LED "Flashes" Cell Selection LED(Right Side)
* Li-Poly 1-2cell : Red LED ON.
* Li-Poly 3Cell : Yellow LED ON.
* Ni-CD, Ni-MH : Green LED ON. Charging Mode Display(Middle LED)
* Charging Mode : Red LED ON.
* Reverse Polarity of out put source : Red LED "Flashes".
* Short Circuit of out put tab : Red LED "Flashes" (The result may destroy battery only)
* Incorrect Cell Count Set : Red LED "Off"(over 4 cell)
* Incorrect Cell Voltage Set : Red LED "Off".
* 80% Complete charging : Red LED & Green LED "On" (It will be worked, when you are charging Li-Poly Battery only.)
* Completed Charging : Green LED "On"