Video Clips ¸
|
Location |
Date |
Video |
Description |
|
White
Pines |
12/30/05 |
Kyle and his 3 foot wing |
|
|
White Pines |
12/30/05 |
Matt’s 3D BlueCor |
|
|
White Pines |
12/30/05 |
Awesome flying Pink Foamy |
|
|
White Pines |
12/30/05 |
Whirlyspud going for the kill and more insane 3D flying |
|
|
White
Pines |
01/21/06 |
Ted’s MiniPink high wing pink foam flyer. Wire cut airfoil and fuse |
|
|
|
|
Andy Gallo cutting up the Australian skyline
with his Ion Extreme Andy
is using two of TrueRC 5S2P 8000mAh packs set up in series for 37V and 8000mAh |
|
|
OK |
09/2005 |
Matt from OK sent this video with
Color Camera mounted on Losi Mini-T. |
Matt’s setup: 8000kv
Mamba setup from Castle Creations with 60T spur and 15T pinion with a 15C
11.1V TrueRC 1000mAh |
|
E-Fest
2006 |
2/11/06 |
David’s
Combat Delta 14oz flying weight 300DF
outrunner 6x5.5
APC 15A
ESC 1000mAh
Lipo 2
Pico servos |
Scott Hurley from Plastic Concept Planes built
this awesome experimental Delta. TrueRC sponsored some gear and the 15C 11.1V
1000mAh lipo. David did an awesome job
flying and took 6th place (out of 24 that entered) in combat.
Congrats David !!! |
|
E-Fest
2006 |
2/11/06 |
Del Ogren
built and flew |
|
|
White
Pines |
4/20/06 |
This is my Corsair F4U
built from Cox Wings ARF kit Setup with Feigao 1208436 4100kv 12mm brushless motor mounted in a
Fox XL motor mount. Controlled by Tower Pro (BP) 10A ESC. GWS 4ch RX with two 3.6
Gram Blue Arrow servos and a GWS 3030 prop. All powered with either a
2S or 3S (in video) 350mAh TrueRC 10C pack. Both 2S and 3S are fun to
fly on this little war bird. |
|
|
Prat Wayne Woods, Barnstormars Club Field |
9/2/06 |
Lou’s 25% 3D
Katana by Pacific Models |
Lou of the RC
Barnstormers was finally fed up with his Super Tigre engine after a couple of
dead stick landings and a crash. TrueRC set him up with
brand new 5340-7 250RPM/V Brushless Outrunner And a pair or 15C 5S3P
6600mAh packs to run as 10S3P. With a 18x10 Zinger this
combination delivered 2800W of power, enough to give Lou over 1.64:1 power to
weight ratio needed to enjoy his Pacific Models 25% 3D Katana once again. Total weigh of the model
is 17lb. This includes the battery packs and motor + extensive frame
repair. |
|
TrueRC
Spotted on YouTube |
All |
LSP-R
Truggy #1 LSP-R
Truggy #2 LSP-R
Truggy #3 |
Misc.Videos from YouTube |
|
TrueRC
spotted on Google Videos |
All |
Misc.Videos from Google Video |
All
Rights reserved by TrueRC and those who
donated the videos. Please use with permission